Description
The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head. Similar to other heads in the OConnor Ultimate fluid head line. For example, the O’Connor 2575D. Therefore, easily transition between lighter and heavier cameras. The O’Connor 1040 supports 23.5kg (52 lb) worth of camera and accessories. In addition, the continuous counterbalance system helps the camera to remain in the position. This stepless counterbalance system is continuously variable from zero to the maximum weight the head can support. This makes the 1040 extremely versatile. Suitable for use with heavy ENG-style cameras, all the way down to lightweight cameras.
The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head. The fluid head is able to tilt 90 degrees forward and back. Thus, tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with 150mm or Mitchell Moy bases.
Payload and Counterbalance
The O’Connor 1040 supports cameras and accessories up to 20.5kg (45 lb) at a COG of 5 inches. This is what the counterbalance can cancel out. While keeping the head neutral in any position in the tilt range. The 1040’s counterbalance also supports light-weight cameras. As the stepless counterbalance can be set all the way down to zero.
Tilt Range
The 1040 provides a very wide tilt range of 90 degrees forward and and rear tilt.
Pan and Tilt Controls
The head features independent controls on the pan and tilt for lock and drag. The pan and tilt locks are easy to operate. Both controls match well with the controls of OConnor’s larger 2575D and 2065 heads. Thus making it easy for operators to move between the heads without having to relearn each head.
Ball Leveling
The 1040 comes standard with a 100mm ball base. The ball allows you to quickly level your shot without having to adjust the tripod legs. Finally, the ball base is also removable. And can be swapped for a 150mm ball, Mitchell / Moy, 4-bolt, 3-bolt, or quickfix.
